UV3701 Energy storage battery CCS module aluminum bar solder joint protection UV glue
UV3701 is a one-component, UV-curable, acrylic adhesive. This product is specifically designed for electrical bonding, fixing, and covering protection of sub-components. The product features medium viscosity, fast curing speed, good weather resistance, and flame retardancy among other resistances.
TYPICAL PROPERTIES
Energy storage battery CCS module aluminum bar solder joint protection UV glue
Specifications
UNCURED PROPERTIES
| Properties | Reference |
| Chemical composition | Polyurethane acrylic resin |
| Physical state | Liquid |
| Appearance | Milky white viscous liquid |
| Viscosity (25°C, spindle viscometer 4#12 mPa.s) | 12000-18000 |
| Specific gravity Kg/L | 1.08 |
| Solvent content (%) | 0 |
| Heavy metal content PPM | 0 |
CURING PROPERTIES
Curing will occur under sufficient ultraviolet irradiation. The curing speed and depth depend on the light intensity, spectral distribution of the light source, irradiation time and the light transmittance of the adhered material. The following data are measured under the condition of ultraviolet radiation of 20mw/cm² produced by a high-pressure mercury lamp:
| Properties | Reference |
| Tack free time (1mm) | 5-10 s |
| Deep curing time (1mm) | 15-20 s |
| Full cure energy (1mm) | 600 mJ/cm² |
*Recommended Curing Equipment: CUV-1800M Mercury UV Curing System
CURED PROPERTIES
The following data are measured after curing with a high-pressure mercury lamp source with a cumulative energy of 600mj/cm²
| Properties | Test method | Reference |
| Hardness Shore D | GB/T 2411-2008 | 73-78 |
| Operating temperature range | -40-130 0C | Customers conduct self-tests with workpieces |
| Shear strength | PC/ABS | ≥25N/cm² |
| Peel strength | PC/ABS | ≥15N/cm² |
Technical Documents
UV3701 Technical Data Sheet
How can we support you?
If you need any assistance, do not hesitate to contact us
Related products
