UV5130 Electronic cable terminal reinforced UV glue

UV5130 is a one-component, UV-curable, acrylic adhesive. This product is specially designed for electronic wiring and fixed sealing of electronic components. It has the characteristics of good adhesion, good toughness, strong earthquake resistance, and good weather resistance.


Electronic cable terminal reinforced UV glue



Properties Reference
Chemical composition Polyurethane acrylic resin
Physical state liquid
Exterior Colorless transparent viscous liquid
Viscosity mPa·s 30000-35000
Specific gravity Kg/L 1.08
Solvent content% 0
Heavy metal contentPPM 0


UV5130 will cure under sufficient UV irradiation conditions. The curing speed and depth depend on the light intensity, spectral distribution of the light source, irradiation time and the light transmittance of the adhered material. The following data are measured under the condition of ultraviolet radiation of 20mw/cm2 produced by a high-pressure mercury lamp:

Properties Reference
Surface drying time (1mm) 3 – 5s
Deep curing time (1mm) 2 – 6s
Full cure energy (1mm) 200 mj/cm²

* Recommended CUV-1800M Inline UV Mercury Curing System


The following data are measured after curing with a high-pressure mercury lamp source with a cumulative energy of 200mj/cm²

Elongation % 160
Operating temperature range -40~130℃ Customers conduct self-test with workpieces
Exterior Visual inspection colorless
Shear strength PC/PC ≥20N/cm²
Peel strength PC/PC ≥3N/cm

Technical Documents

UV5130 Technical Data Sheet

How can we support you?

If you need any assistance, do not hesitate to contact us