UV5136 LCD display FPC protection reinforced UV glue
UV5136 is a one-component, UV-curable, acrylic adhesive. This product is specially designed for bonding and fixing various electronic components and plastic substrates; the product has the characteristics of a fluorescent effect, good flexibility, fast curing speed, high bonding strength, and good weather resistance.
TYPICAL APPLICATION
LCD FPC protection reinforced UV glue
Specifications
UNCURED PROPERTIES
| Properties | Reference |
| Chemical composition | Polyurethane acrylic resin |
| Physical state | liquid |
| Appearance | Light yellow transparent viscous liquid (fluorescent) |
| Viscosity (25℃, spindle viscometer 4#30 mPa·s) | 6500-7500 |
| Specific gravity Kg/L | 1.08 |
| Solvent content% | 0 |
| Heavy metal contentPPM | 0 |
CURING PROPERTIES
UV5136 will cure under sufficient UV irradiation conditions. The curing speed and depth depend on the light intensity, spectral distribution of the light source, irradiation time and the transmittance of the adhered material. The following data are measured under the condition of ultraviolet radiation of 20mw/cm2 produced by a high-pressure mercury lamp:
| Properties | Reference |
| Tack free time (1mm) | 15-20 S |
| Deep curing time (1mm) | 35-40 s |
| Full cure energy (1mm) | 1000 mj/cm² |
*Recommended curing system: CUV-350 UV Mercury Lamp
CURED PROPERTIES
The following data are measured after curing with a high-pressure mercury lamp source with a cumulative energy of 1000mj/cm2:
| Properties | Test method | Reference |
| Hardness | Shore D | 45-50 |
| Elongation % | 180 | |
| Operating temperature range | -40～130℃ | Customers conduct self-test with workpieces |
| Shear strength | PC/ABS | ≥100N/cm² |
| Peel strength | PC/ABS | ≥50N/cm² |
Technical Documents
UV5136 Technical Data Sheet
How can we support you?
If you need any assistance, do not hesitate to contact us
Related products
