UV5134 UV glue for plastic bonding
UV5134 is a one-component, UV-curable, acrylic adhesive. This product is designed for the bonding of PMMA, PC, TPU, PET and other plastics. It is mainly used for projects with glue overflow and surface drying. It has the characteristics of moderate viscosity, strong adhesion, surface drying, high transparency, and good weather resistance. , plastic also has certain adhesion to glass.
Specifications
UNCURED PROPERTIES
| Properties | Reference |
| Chemical composition | Polyurethane acrylic resin |
| Physical state | liquid |
| Appearance | Light yellow transparent viscous liquid |
| Viscosity mPa·s | 1500-1800 |
| Specific gravity Kg/L | 1.05 |
| Solvent content% | 0 |
| Heavy metal contentPPM | 0 |
CURING PROPERTIES
UV5134 will cure under sufficient UV irradiation conditions. The curing speed and depth depend on the light intensity, spectral distribution of the light source, irradiation time and the light transmittance of the adhered material. The following data are measured under ultraviolet radiation conditions of 20mw/cm2 generated by a high-pressure mercury lamp (it is recommended to use a UV lamp of 400W or above):
| Properties | Reference |
| Fixed time(S) | 2-4 S |
| Tack free time (1mm) | 5-10 s |
| Deep curing time (1mm) | 10-15 s |
| Fully cured energy | 600 mj/cm2 |
CURED PROPERTIES
| Properties | Test method | Reference |
| Hardness Shore D | GB/T 2411-2008 | 70-75 |
| Operating temperature range | –40～130℃ | Customers conduct self-test with workpieces |
| Bonding strength | PC/PC | >20N/cm |
| Bonding strength | APET/APET | >20N/cm |
Technical Documents
UV5134 Technical Data Sheet
How can we support you?
If you need any assistance, do not hesitate to contact us
