UV5133 UV glue for plastic bonding
UV5133 is a one-component, UV-curable, acrylic adhesive. This product is designed for the bonding of PMMA, PC, TPU, PET, and other plastics. It is mainly used for projects with glue overflow and surface drying. It has the characteristics of moderate viscosity, strong adhesion, surface drying, high transparency, and good weather resistance. , plastic also has certain adhesion to glass.
Specifications
UNCURED PROPERTIES
| Properties | Reference |
| Chemical composition | Polyurethane acrylic resin |
| Physical state | liquid |
| Appearance | Light yellow transparent viscous liquid |
| Viscosity (25℃, spindle viscometer 4#60 mPa·s) | 5500-6500 |
| Specific gravity Kg/L | 1.05 |
| Solvent content% | 0 |
| Heavy metal contentPPM | 0 |
CURING PROPERTIES
UV5133 will cure under sufficient UV irradiation conditions. The curing speed and depth depend on the light intensity, spectral distribution of the light source, irradiation time and the light transmittance of the adhered material. The following data are measured under ultraviolet radiation conditions of 20mw/cm2 generated by a high-pressure mercury lamp (it is recommended to use a UV lamp of 400W or above):
| Properties | Reference |
| Tack free time (1mm) | 4-6 S |
| Deep curing time (1mm) | 10-15 s |
| Full cure energy (1mm) | 600 mj/cm² |
CURED PROPERTIES
The following data are measured after curing with a high-pressure mercury lamp source with a cumulative energy of 600 mj/cm²:
| Properties | Test method | Reference |
| Hardness | Shore D | 70-75 |
| Operating temperature range | –40～130℃ | Customers conduct self-test with workpieces |
| Shear strength | PC/PC | ≥100N/cm² |
Technical Documents
UV5133 Technical Data Sheet
How can we support you?
If you need any assistance, do not hesitate to contact us
