UV3606 Light-curing Maskant
UV3606 is a fast UV cure maskant. This product is formulated for temporary protection of metal and plastic, glass against chemicals, water, dust, oil etc. It’s high elongation and good adhesion. Easy to peel off from different substrate.
Features and benefits
- Fast curing.
- High elongation
- Easy peel-off from different substrates
- Moisture and chemical resistant
- Soft and durable after proper cure
Specifications
TYPICAL UNCURED PROPERTIES
| Properties | UV3606 |
| Chemical composition | Urethane acrylate |
| Color | Clear white |
| Solids | 100% |
| Viscosity, cps | 27,780 |
| Ti | 5.1 |
Note: The above technical information and data should be considered representative or typical only and should not be used for specification purposes.1 Test instruments and conditions: Brookfield CP52 10rpm @25℃
TYPICAL CURING PROPERTIES
| Bonding strength | UV3606 |
| Substrate | Tensile strength (Mpa) |
| PC-ANAL | 1.9 |
| Glass-PC | 2.8 |
| Cure depth 365nm 500mW/cm2*2sec | 1.1mm |
| Hardness Shore A (ASTM D2240) | 35 |
| Elongation at break (ASTM D638) | 490% |
| Tensile trength, at break, Mpa | 3.4 |
Recommended UV cure condition: LED@365nm (or Hg lamp) energy 2000mJ/cm2 , test by GLUDITEC FUV-100
Contact GLUDITEC technical support for additional curing recommendations
Technical Documents
UV3606 Technical Data Sheet
How can we support you?
If you need any assistance, do not hesitate to contact us
