UV3501 BGA four-corner underfill UV glue
UV3501 is a one-component, UV-curable, acrylic adhesive. This product is specially designed for bonding, fixing, and covering protection of electronic components; the product has the characteristics of high viscosity, fast curing speed, and good weather resistance.
TYPICAL APPLICATION
BGA four-corner underfill UV glue
Specifications
UNCURED PROPERTIES
Properties | Reference |
Chemical composition | Polyurethane acrylic resin |
Physical state | Liquid resin |
Appearance | Colorless transparent viscous liquid |
Viscosity (25°C, spindle viscometer4#12 mPa.s) | 25000-40000 |
Specific gravity | 1.08 |
Solvent content (%) | 0 |
Heavy metal content PPM | 0 |
CURING PROPERTIES
Curing will occur under sufficient ultraviolet irradiation. The curing speed and depth depend on the light intensity, spectral distribution of the light source, irradiation time, and the light transmittance of the adhered material. The following data are measured under the condition of ultraviolet radiation of 20mW/cm² produced by a high-pressure mercury lamp.
Properties | Reference |
Tack free time (1mm) | 10-15 s |
Deep curing time (1mm) | 30-35 s |
Full cure energy (1mm) | 900 mJ/cm² |
CURED PROPERTIES
The following data are measured after curing with a high-pressure mercury lamp source with a cumulative energy of 900mj/cm².
Properties | Test method | Reference |
Hardness | Shore D | 70-75 |
Elongation % | 160 | |
Operating temperature range | -40-130ºC | Customers can test by themselves according to the workpiece |
Exterior | Visual inspection | Transparent |
Shear strength | PC/ABS | ≥25N/cm² |
Peel strength | PC/ABS | ≥15N/cm² |
Technical Documents
Technical Data SheetHow can we support you?
If you need any assistance, do not hesitate to contact us