Home | Liquid Repackaging System | Two-part Adhesive Down Packaging | Two-part 50ml and 400ml Cartridge Filling System DPG-200-40

Two-part 50ml and 400ml Cartridge Filling System DPG-200-40

The Two-part 50ml and 400ml Cartridge Filling System DPG-200-40 is specifically designed for down-packaging adhesives from 200L drums into smaller cartridge sizes, such as 50ml and 400ml, with a 3:1 mixing ratio. This system is ideal for low to medium-viscosity adhesives like epoxy resin, polyurethane, and silicone, including those with specific additives. The DPG-200-40 delivers highly accurate filling and is capable of precise measurements as small as 0.5g during mixing, pouring, and packaging processes. It features a Siemens PLC control unit with an intuitive touchscreen interface, enabling precise configuration and control of the adhesive filling process, ensuring ease of use and reliability.

Features and benefits

Possibly handle high-viscosity liquid/ adhesive
Flexible configuration and modular design
Stable performance
Increasing productivity
Simple and easy to operate
Higher component reliability

OPERATION MODE

Manual mode: Used for equipment debugging, testing, and diagnosing faults.
Semi-automatic mode: Executes programmed steps for glue filling, triggering dispensing automatically.
Automatic mode: The preferred mode for seamless glue injection during normal operations.
Vacuum operation: Activated via a dedicated button on top of the machine.
Mode switching: May interrupt ongoing processes; avoid switching during glue injection.

Specifications

SYSTEM CONFIGURATION

Two-part Cartridge Filling System

GENERAL SPECIFICATIONS

Properties	DPG-200-40
Operating voltage	AC220V 50Hz
Portioning ratio	3:1 (customizable)
Accuracy	±2%
Repeatability	±2%
The maximum flow velocity of the object	10 ~ 15 g/s.
Tank volume	30L + 30L
Operating air pressure	0.4 ~ 0.7 MPa.s
Machine size	1450mm×1200mm×1650mm (appro.)
Total weight	400kg