site-logo

GVJ-511 High Speed Jetting Valve

The GVJ-511 valve has the capability to reach a maximum frequency of 250HZ. It uses a jet-type mechanism to spray liquid onto the workpiece surface. The spray dot consistency accuracy is above 98%, with a minimum injection of 0.002ul. This valve is compatible with any dispensing platform, dispensing robot arm, and machine platform available in the market. It can also be used to spray into narrow gaps and apply glue onto uneven workpiece surfaces.

Features and benefits

  • Suitable for spraying a variety of fluids, can be applied to UV, epoxy, sealing, thermal conductivity, silicone oil, silicone old and so on
  • The minimum spraying point is 0.3mm in width
  • Dispensing frequency can be up to 200Hz
  • It can be equipped with any dispensing platform in the market, easy to disassembly and maintain

Specifications

Model
GVJ-511
Outline size (mm)
W24 x D90 x H160
Material of valve body
SUS304
Fluid inlet
International Ruhr Interface
Firing pin assembly
Special alloy
Integral nozzle assembly
Special alloy
Heating temperature range
RT ~ 75°C
Heating rod power
100W
Fluid seal ring
PEEK/ PE/ PIFE
Valve body ring
HNBR
Firing pin piston
Synthesis PIFE
Drive solenoid valve
FESTO
Max. dispensing frequency
200Hz
Min. drive pressure
0.6MPa
Dispensing fluids
Adhesives, lubricants, water solvents, liquid polymers, inks, silicone oils, etc.
Max. permissible diameter of particle
20µm
Operating ambient temperature
0 ~ 45°C
Dispensing accurate
2% (at the same pressure and temperature)
Min. opening time
3ms
Min. pause time
2ms
Compressed air for cleaning
Air with dust particles are less than 0.3µm

How can we support you?

If you need any assistance, do not hesitate to contact us