GV-697 – Non-atomizing Film Conformal Coating Valve
Precision conformal coating dispensing moisture-proof material into thin film patterns
The GV-697 conformal coating valve is specifically engineered to administer moisture-resistant coatings onto PCBs at a reduced flow rate. Its unique square-cut nozzle design guarantees exceptional stability and prevents any excess spray, resulting in a faster and mess-free dispensing process.
Features and benefits
- Consistent and precise coating
- No overspray or misting
- Customizable spray quality
- Gentle and controlled spraying
Specifications
VALVE OPERATION
Input air pressure retracts the piston needle from the nozzle seat, allowing fluid to flow. (Figure 1)
Once the cycle is completed, the piston spring returns the piston needle back to its position to shut off the fluid. (Figure 2).
SPRAY COVERAGE AREA
Nozzle distance from the surface | Nozzle size | ||
#9 | #6 | #4 | |
10mm | 18mm | 11mm | 8mm |
Model
GV-697
Dimension
φ26.9 (Fluid body) × 141.0mm
Net weight
334g (except fluid inlet fitting part)
Air cylinder body
SUS303
Piston needle
SUS303
Needle packing
SUS303, teflon
Fluid body / Extension
SUS303
Tip adapter
SUS303
Fluid inlet port
1/8NPT female
Mounting hole
M6 female
Valve operating air pressure
0.4 ~ 0.62 MPa
Maximum nozzle air pressure
0.2MPa (Standard)
Maximum fluid pressure
0.7MPa
Free flow orfice (special)
#9, #6, #4
Technical Documents
Technical Data Sheet - GV-697 Non-atomizing Film Coating ValveHow can we support you?
If you need any assistance, do not hesitate to contact us