GSP-300 Cartridge Progressive Cavity Pump 300/330ml

The GSP-300 supply system utilizes a pressure pump to push the 300cc/330cc packaging rubber drum. The pressure maintains a constant material flow rate, which combined with the precise timing control of the on-off valve, ensures consistent dispensing volume and speed. This system is suitable for Silicone, Epoxy Resins, Greases, Thermally Conductive Gels, Thermally Conductive Silicones, Sausage Gels, and various medium to high-viscosity fluids.

Features and benefits

  • Direct use of 300cc/330cc silicone sleeve and sausage glue packaging for fixed amount dispensing.
  • Suitable for dispensing high-viscosity glue ranging from 10,000-1,000,000.
  • Uses mechanical extrusion to dispense glue due to the high viscosity of silicone, resulting in more accurate glue output. This method eliminates the residue of gas in the silicone that can occur with pneumatic pressure conveying methods.
  • Compact design and easy operation. An external precision dispensing valve improves production capacity and dispensing quality.
  • The pump head is equipped with a low-level glue alarm switch.


Properties GSP-300
External dimensions L425 x W210 x H675 mm
Power 10W
Air Input 0.5 ~ 0.7 MPa
Cylinder thrust 50kg (at air pressure 0.5Mpa)
Track length 1500mm, customizable
Pumping method Cylinder push + pressure pump self-priming
Glue packaging 300cc/ 330cc packing
Sealant material PEEK/TEFLON/ Special rubber
Structural part material Aluminum alloy anode/stainless steel
Applicable material viscosity 10,000 ~ 1,000,000 cps
Hardness of applicable material <60HRC
Control mode MCU control
Monitoring method Closed-loop control of pressure sensors
Alarm alert Lack of material alarm, abnormal pressure alarm

Technical Documents

GSP-300 Technical Data Sheet

How can we support you?

If you need any assistance, do not hesitate to contact us