GLT – 3080 – Addition Cure Silicone

GLT – 3080 addition cure silicone gel is viscous, transparent liquid with low viscosity, and belongs to two-component addition cure silicone rubber. After mixing the part A and part B at a mix ratio of 1:1, it cures at room temperature or by heating and becomes gel-like elastomer. This silicone rubber is used for the surface of poly-carbonate (PC), PP, ABS, PVC and metal, etc. The curing reaction does not generate heator any by-products.

Features and benefits

• Environment-friendly, odorless and nontoxic, not generate
• Low viscosity, easy to pour
• Good self-leveling and softness
• Non oily
• Excellent adhesion property for most materials
• Excellent electrical properties suitable for sealing and waterproof
of electrical and electronic devises
• Resistance to weather, high and low temperature, corrosion,
• Cure at room temperature or by heating
• Shrinkage is almost zero




Typical general characteristics Inspection method Value
Product data (Catalyzed A+B) A B
Mixing ratio A:B 1:1 1:1
Colour Transparent Transparent
Pot life 25°C (77F) 60~120mins 60~120mins
Curing time 25°C (77F) 8~12h 8~12h
Viscosity mPa·s 500±300 500±300
Thermal conductivity W/(m·k) 0.2~0.3 0.2~0.3
Volume resistivity (Ω·m) 10^13~10^14 10^13~10^14
Flame-retardant level V-2 V-2
Shrinkage % ≤0.1 ≤0.1

Technical Documents

TDS - GLT - 3080

How can we support you?

If you need any assistance, do not hesitate to contact us