site-logo

ET3201 – Two-part Epoxy for Electronic Devices

ET3201 is two-component epoxy which exhibits low viscosity, easy to handle, excellent chemical resistance and perfect surface gloss. This product is suitable for various applications in electronics, such as potting, casting, sealing, encapsulating and bonding. ET3201 is ideally used for general purpose which require long work life.

Features and benefits

  • The hardener of ET3201 will not yield an insoluble & whitish solid
  • When exposing to air.
  • The curing surface will not oilly and poor gloss
  • Excellent insulation properties even under high humidity
  • Long working time of ~ 8 hours
  • Excellent chemical and solvent resistance
  • Comply to the 2011/65/EU RoHS regulations

Certifications

Specifications

TYPICAL UNCURED PROPERTIES

Properties ET3201-A ET3201-B
Appearance Liquid Liquid
Color Colorless Colorless
Viscosity
*25ºC, cps
3,000~5,000
S14, 100rpm
10
S14, 100rpm
Specific Gravity 1.16 0.98

TYPICAL CURING PROPERTIES

Properties Value
Mix Ratio (A:B) by Weight 100 : 33
Pot Life, 25ºC, hr 8
Through Cured Time, 25ºC, day 2
Through Cured Time, 80ºC, hr 3

TYPICAL CURED PROPERTIES

Glass Transition Temp., (DSC), ºC 90
CTE (<Tg), µm/m/ºC 38
CTE (>Tg), µm/m/ºC 230
Durometer Hardness, Shore D 76
Water Absorption Ratio (25ºC/24hr), % 1.59
Water Absorption Ratio (25 C/94%RH/
30days), %
0.01
Shear Strength Al vs Al, kg/cm² 180
Tensile Strength MPa 50
Tensile Modulus MPa 900
Elongation, % 10
Toughness, J/m² 5.0
Notched Izod Impact Strength, J/m 5.9
Degradation Temp, (TGA 10ºC /min), ºC 324
Weight Loss Ratio@100ºC, % 0
Thermal Conductivity w/mk 0.3
Thermal Resistance m² k/w 0.01
Spectral Transmission@1,200-4,000nm,% 80
Volume Resistivity, ohm-cm 4.5 *10^15
Surface Resistivity, ohm 5*10^14
Dielectric Constant 100Hz 4.1

*1 Specimen Cure Condition:80ºC / 1hr
*2 CTE: Coefficient of Thermal Expansion

Technical Documents

TDS - ET3201

How can we support you?

If you need any assistance, do not hesitate to contact us