ES1512 Red Glue – Epoxy Adhesive for Chip bonder
ES1512 is a heat-cured adhesive that falls under the category of one-component epoxy adhesives. It has been specifically formulated for stencil printing and is known for its exceptional bonding strength, resilience in high-humidity environments, impressive electrical performance, and reliable storage stability.
Features and benefits
- Solvent-free, non-volatile, which offers excellent retention of electrical insulation properties under high humidity conditions.
- Medium viscosity and excellent thixotropy, which can be controlled flow and have sag resistance.
- Fast curing helps to shorten the working time
- Low stress, shrinkage, and water absorption
Specifications
TYPICAL UNCURED PROPERTIES
| Properties | ES1512 |
| Appearance | Paste |
| Color | Red |
| Viscosity @25°C, Pas
Brookfield RV, Spindle 7 |
280,000 ~ 380,000 |
| Thixotropic Index | 8 |
| Density, g/cm³ | 1.2 |
TYPICAL CURING PROPERTIES
| Properties | ES1512 |
| Pot Life, 25°C, days | 7 |
| Through Cured Time 120°C by hot place, sec | 90~120s |
| Through Cured Time 150°C by hot place, sec | 60~90s |
TYPICAL CURED PROPERTIES
| Properties | ES1512 |
| Hardness (Shore D) | 85 |
| Shear Strength, MPa | 16.5 |
| Tg (ºC), DSC | 98 |
| Dielectric strength, kV/mm | 26.8 |
| Surface resistance (Ohm) | 5.5*10^16 |
| Volume resistance (Ohm.cm) | 2.4*10^15 |
Technical Documents
ES1512 Technical Data Sheet
How can we support you?
If you need any assistance, do not hesitate to contact us
