SELECTION GUIDELINE
How to choose a dispensing system for Cyanoacrylate/ Instant Adhesive/ Super Glues?
Get to know the CAs and Considerations when choosing its suitable dispensing system
Utilizing greater control for higher production throughput with less rework and fluid waste, GLUDITEC compromises to provide the right dispense system and fine-tune process adjustment for successful CA dispensing. When choosing a CA Dispensing System, we must take into considerations lots of factors. Depending on your requirements, different system can be chosen.
1. Choosing a Single Component Dispensing System designed for CAs
For low- to medium-volume production, using a dispensing controller will provide the most convenient and accurate dispensing process.
GC-826P
Semi-automated Instant Adhesive Peristaltic Dispenser
- Air-free dispensing eliminates air in product
- Forward and reverse motion of rotor
- Virtually no wasting of adhesive since it travels from the product bottle, thru the feedline tubing, and onto the part
GC-810
Semi-automated Instant Adhesive Syringes Barrel Dispenser
-
- Feature a 0 – 100 psi constant-bleed pressure regulator that provides accurate CA deposits required by your application
- Allow fine adjustment of pressure and vacuum dispensing parameters to apply the right amount of material
For high-volume production, a precision dispense valve system provides the most controlled CA dispensing process. The best valve system for instant adhesive is a closed loop system that won’t introduce air oir moisture from any source.
GV-525UP
Diaphragm Dispensing Valve for air sensitive materials
- A UHMW (Ultra High Molecular Weight) polyethylene wetting part prevents CA from curing prematurely
- Very small dead volume, which reduces exposure of the adhesive to the ambient environment and reduces air entrapment
- Adjustable stroke control for better flow rate control of low-viscosity cyanos
GC-824
Dispensing Valve Controller for High precision dispensing task
- Feature a 0 – 100 psi constant-bleed pressure regulator that provides accurate CA deposits required by your application
- Allow fine adjustment of pressure and vacuum dispensing parameters to apply the right amount of material
GST-10-TP-L
Pressure Tank with Top Port & Level Gauge
- Our GST tank series 1L tank accommodates 500 gram bottles of CAs
- Simplify refilling and reduce handling
- TP – Top port allows a user to feed fluid directly from a 500gr bottle, so no pouring or cleaning of the reservoir is necessary
- Create a closed system that keep air out of the process from start to finish
At the higher level, a semi-automated system with a desktop dispensing robot, suitable syringes barrel & relative pressure controller. However, for the most accurate placement of CAs, it is better to use an fully automated dispensing system which replace the syringes barrel by a dispensing valve.
More information of the whole system
SR Series
Desktop Dispensing Robot with GC-824 Controller
- Simplified setup and programming via Teach Pedant or file importation
- True, three-dimensional motion control
- Rugged, reliable construction and small footprint
- Wide range of work envelopes
More information of the whole system
SR Series & GV-500 Series
Desktop Dispensing Robot & GV Valves with GC-824 Controller
- SR Series Desktop Dispensing Robot for 3 axis Motion Control
- GV Valve suitable for high-precision dispensing the CA Adhesive
- Timing, Pressure & Vacuum Controlling Equipment
- Pressure Tank for larger volume reservoir
A fully automated system with parts that advance on a production line is another advanced system that must be considered when your manufacturing site have higher requirements in performance.
In this system, parts place on a conveyor or rotary table are detected by sensors and automatically receive a deposit of CA from the dispensing valve. The valve may be mounted on the line and controlled by a valve controller or PLC. It may also be mounted on an automated dispensing robot, which is programmed and controlled via a personal computer.
GSR Series
Gantry Dispensing Robot with GC-826PQ Controller & Multiple Output
- Working envelopes range from 300mm to 4000mm, making GSR Series an ideal solution for precise dispensing onto substrates requiring large work envelopes while not sacrificing repeatability.
- GSR Series can work as a standalone system or as a key part of an automated solution and is easily integrated into rotary tables and conveyor-fed assembly lines.
