GLUDITEC Dispensing Technology

Conformal Coating System for Outside Operating PCBA

Conformal coating for Printed Circuit Board Assemblies (PCBAs) used in outdoor equipment such as lawnmowers and automotive applications offers several key benefits: Environmental Protection Conformal coatings provide a protective barrier against environmental elements such as...

Notes when choosing 5-axis dispensing robot

In modern industries, 5-axis adhesive dispensing robot has become an indispensable technology in the adhesive dispensing process. However, choosing a suitable robot for production needs is an important consideration for manufacturers. In this article, GLUDITEC...

Benefits of 5-Axis Dispensing Robot and Applications in Manufacturing

In mass production, to ensure accuracy and high efficiency in the adhesive dispensing process, the 5-axis adhesive dispensing robot is becoming an optimal and increasingly popular choice. With its flexibility and multitasking capabilities, the benefits...

What is 5 Axis Dispensing Robot? (Structure and Operation)

In adhesive dispensing applications on complex machining parts, using only a standard 3-axis adhesive dispensing robot would be insufficient to operate in positions obstructed by other components or in difficult-to-reach areas. Therefore, to ensure accuracy...

Pot life and Curing of Coating

Pot Life The chemical composition is also very important as often materials have finite work times, commonly referenced as pot life; the hardware must be cleaned to avoid curing inside the equipment. The presence of...

The Essential Guide to Large-Volume TIM Dispensing

Thermal Interface Material As electronic devices continue to get smaller and theamount of heat they generate increases, cooling andtemperature control have become critical. DispensableThermal Interface Materials (TIMs) are an excellentsolution for these applications because they...

Plasma Treatment Process prior to Conformal Coating

The corrosion of Nickel-Palladium-Gold (Ni-Pd-Au) finish terminals in humid enviroments is known to be reduced with the application of a conformal coating such as acrylic. Corrosion has a higher rate of occurance around the terminal...

Challenges and Solutions to Large-Volume TIM Dispensing

Viscosity Problems The viscosity of some materials can be inconsistent within a pail, and that variability can gradually change the flow rate. How can this be addressed? Include Mass Flow Calibration (MFC) and the large...

Choosing the Right Valve for a Selective Robotic Conformal Coating Application Process

Table of Contents Before starting any selective conformal coating process, it is essential to consider the right system and valve combination for the material and circuit board combination. This is the final stage in ensuring...

Process Control Methods for Conformal Coating

Conformal coating applications present a range of challenges to contract manufacturers and original equipment manufacturers (OEMs). Because of miniaturization trends, more creative dispensing techniques are required to maintain accuracy, repeatability and selectivity. Many types of...

Benefits of Upgrading from Manually Dispensing from Bottles to Dispensing Controller

More Accurate Dispensing Can Increase Production Speed byUp to 40% Surprisingly, more than 50% of industrial and manufacturing plants are frequently using squeeze bottles, medical syringes, cotton swabs, and toothpicks to apply fluids in their...

Vacuum Potting for Isolator

Safety and Functional During the production of isolators, bubbles in the potted workpiece cannot be tolerated. Since these high-voltage components must meet the highest #functional quality and #safety requirements, potting in a vacuum is increasingly...